PT-EX520A

Power supply	100–240 V AC, 50/60 Hz
Power consumption*1	461 W (0.5 W with Standby Mode set to Eco*1, 12 W with Standby Mode set to Normal); 424 W with Lamp Power set to Normal, 305 W with Lamp Power set to Eco
LCD panel
Panel size	16.0 mm (0.63˝) diagonal (4:3 aspect ratio)
Display method	Transparent LCD panel (x 3, R/G/B)
Drive method	Active matrix
Pixels	786,432 (1024 x 768) x 3, total of 2,359,296 pixels
Lens
PT-EX520	1.8 x powered zoom (throw ratio 1.32–2.44:1), powered focus F 1.6–2.2, f 17.1–31.7 mm
PT-EX520L	Optional powered zoom/focus lenses and fixed-focus lens
Lamp	320 W UHM lamp x 1, lamp replacement cycle (Lamp Power: Normal/Eco): 4,000 hours/5,000 hours*2
Screen size (diagonal)	1.05–10.77 m (40–400˝), 4:3 aspect ratio
Brightness*3	5,300 lm (Lamp Power: Normal, Dynamic Mode, Iris: OFF, Daylight View: OFF, Auto Power Save: OFF)
Contrast*3	2,000:1 (Lamp Power: Normal, Dynamic Mode, Iris: ON, Daylight View: OFF, Auto Power Save: OFF)
Resolution	1024 x 768 pixels*4
Supported RGB signal	XGA–WUXGA
Supported video signal	NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i
Optical axis shift (from center of screen)
Vertical	±50 % (powered)
Horizontal	±30 % (powered)
Keystone correction range*5	Vertical: ±25 °, horizontal: ±30 °
Installation	Ceiling/floor, front/rear
Operation noise*3	35 dB (Lamp Power: Normal), 29 dB (Lamp Power: Eco)
Cabinet materials	Molded plastic (PC + ABS)
Dimensions (W x H x D)
PT-EX520	498 x 145*6 x 398.3 mm (19 19/32˝ x 5 11/16˝*6 x 15 11/16˝) (with supplied lens)
PT-EX520L	498 x 145*6 x 358 mm (19 19/32˝ x 5 11/16˝*6 x 14 3/32˝) (with supplied lens)
Weight*7
PT-EX520	Approximately 8.4 kg (18.5 lbs) (with supplied lens)
PT-EX520L	Approximately 7.7 kg (17.0 lbs) (without lens)
Operating environment	Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 20–80 % (no condensation)
Applicable software	Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software
TerminalsPT-EX520 / EX520L

*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.

*2 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more frequently or kept on for a long time, lamp replacement cycle will be reduced. Usage environment affects the duration of the lamp.

*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*4 Input signals that exceed supported resolution will be converted.

*5 With the supplied lens. Value differs when the correction for both directions is operated.

*6 With legs at shortest position.

*7 Average value. May differ depending on models.

*8 At altitudes below 1,400 m (4.593 ft) above sea level. Operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level. Also, if ambient temperature exceeds 40 °C (104 °F) (35 °C [95 °F] at high altitude), lamp power automatically switches to Eco to in order to protect the projector.